Hooke's Law (1D Stress-Strain Relation)
Defines the linear elastic proportional relationship between normal stress and resulting strain in materials.
Interactive Calculator Call to Action
Material Weight Calculator
Calculate interactively with instant results, step-by-step derivations, and unit conversion. Built on the same engineering standards as this formula reference.
Primary Mathematical Expression
Design Schematic
Nomenclature & Variables
| Symbol | Variable Name | Metric Unit | Imperial Unit | Description |
|---|---|---|---|---|
| \sigma | Normal stress | MPa | psi | The internal normal resistance force per unit area. |
| E | Modulus of elasticity | GPa | Mpsi | Material stiffness property / Young's Modulus. |
| \epsilon | Strain | dimensionless | dimensionless | Relative deformation ratio (change in length divided by original length). |
Step-by-Step Derivation
- 1
Consider a bar under axial tension, where stress \sigma represents internal force intensity and strain \epsilon is the ratio of elongation.
- 2
Robert Hooke observed in 1676 that the extension of a spring is directly proportional to the applied load.
- 3
In materials science, this is normalized as stress being proportional to strain: \sigma \propto \epsilon.
- 4
The constant of proportionality is defined as Young's Modulus (E), which measures the material's stiffness.
- 5
Therefore, the linear elastic relation is written as Hooke's Law: \sigma = E * \epsilon.
Worked Example Calculation
A structural steel bar (E = 200 GPa) undergoes an elastic strain of 0.0008. Calculate the normal stress in the bar.
- •Identify input parameters: E = 200 GPa = 200,000 MPa, \epsilon = 0.0008.
- •Apply Hooke's Law Formula: \sigma = E * \epsilon.
- •Compute: \sigma = 200,000 * 0.0008 = 160 MPa.
Engineering Assumptions
- •Material is homogeneous, isotropic, and elastic.
- •Stress levels do not exceed the proportional elastic limit.
Design Limitations
- •Not valid in the plastic deformation region (requires strain-hardening formulations).
Academic References & Standards
Tension Testing of Metallic Materials
Standard test procedures for metallic materials tensile evaluation.
Shigley's Mechanical Engineering Design - Materials properties
Textbook covering Hooke's Law and elastic curves.
Related Resources
Related Calculators
Engineering Data
Related Standards
Related Articles
Related Engineering Articles
Compare mechanical properties (yield strength, elastic modulus, density, machinability) for carbon steel, alloy steel, stainless, aluminum, brass, cast iron, and polymers.
Deconstruct the tensile test diagram: elastic limits, plastic deformation, necking, ultimate strength, and ductile fracture modes.